Mount, parapet for pan and tilts with enclosures. Mounts to inside of parapet at least 18" high. Use with PA2000 or PA2010. Model PP200 Parapet Mount Spec Sheet in PDF format The PP200 is a parapet mount designed primarily for use with the ED28/ED2820 Series Harris Dome, but can also be used with the ED27/ED2720 Series environmental domes or a pan and tilt with environmental enclosure. The PP200 mounts on the inside of a parapet and is rotatable a full 360 degrees by simply loosening the "U" bolts so that the tube can swivel freely. Its unique design allows it to be positioned anywhere on the parapet, including corners. The PPI200 vertical indexer mount must be used when mounting either dome series to the PP200 mount. The PPI200 enables the dome to be rotated 360 degrees in a vertical plane by removing the quick release pin, which allows the dome to spin freely. To secure the dome, simply replace the pin. If your application includes the use of a pan and tilt, the PM102A, PA2010, or PA2000 pan and tilt adapter plate is required in order to mount the pan and tilt to the PP200. The PP200 allows the equipment to be installed and serviced in safety from the rooftop. Features * LOW COST * ALUMINUM CONSTRUCTION * SUPPORTS UP TO 175 LBS (78.75 KG) * FOR USE WITH ED27/ED2720 AND ED28/ED2820 SERIES DOMES OR PAN/TILT WITH ENVIRONMENTAL ENCLOSURE $157.70 |
   
 Housings | Cabinets & Racks | Keyboards and Controls | Mounts | Scanners and Pan/Tilts | Camclosure | Spectra | Power Distribution | ImagePak | Domepak | Esprit | Receivers | Digital Recorders | Video over Network Security Design Services family of companies cctvhardware.com | allkindscable.com | securityideas.com |