The Pelco MCS16-20 master indoor camera power supply allows 16 fused outputs with total capacity of 20 amps. UL Listed. 120/240 VAC input, 24/28 VAC output. Spec Sheet in PDF format Product Features * 20 Amp Capacity * Outputs for 16 Cameras * Fuse or Circuit Breaker Protection; Spare Fuses Included with Fused Models Only * 120 VAC or 230 VAC Selectable Input * 24 VAC Output or 28 VAC Output for Longer Wire Runs * UL, cUL, and CE Approvals Pending * AC Power Indicator with Power On/Off Switch * Compatible with Spectra(R) and Esprit(TM) Systems The power supplies provide 24 VAC output for 16 cameras. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on most models. The power supplies have a selectable input of 120 or 230 VAC and are packaged in an easy-to-install metal enclosure that has ample room for wiring connections and conduit entries. For integrated systems such as Spectra(R) and Esprit(TM) the higher capacity models are capable of handling pan/tilt and receiver operation in addition to the camera. Models are available with either fuses or self-resetting circuit breakers on each output. Fused models provide a greater degree of protection for the camera because they are faster acting and more precise. Circuit breakers will self-reset when the fault is corrected, eliminating the need for replacing fuses. In addition, the amount of current required to trip a circuit breaker can vary as much as 100% depending on temperature. In the fused models, the values of fuses can be changed depending upon the specific current requirements of the equipment connected. |
   
 Housings | Cabinets & Racks | Keyboards and Controls | Mounts | Scanners and Pan/Tilts | Camclosure | Spectra | Power Distribution | ImagePak | Domepak | Esprit | Receivers | Digital Recorders | Video over Network  Security Design Services family of companies cctvhardware.com | allkindscable.com | securityideas.com |