 |  | 
  
The Pelco EH3508 EH3508-1, EH3508-2 Series are indoor/outdoor, low-cost camera enclosures constructed from die cast and extruded aluminum.
The EH3508 Series is the smallest of our environmental enclosures and can be used with cameras having fixed focal length or motorized zoom lenses (with or without auto-iris operation). The enclosure features a front hinged lid, two adjustable (PG13.5) cable glands on the bottom, and a rear link-lock latch that can be used with a padlock of suitable size for applications requiring additional security.
Field installed options for the EH3508 include heater-defroster and sun shroud. Power consumption of heater and defroster is 13 watts.
These enclosures can also be factory ordered with a low power 24V, 120V, or 230V heater-defroster for applications where high humidity or low temperatures are prevalent. Factory installed heater is thermostatically controlled to activate ON at 50 degrees F (10 degrees C) and OFF at 80 degrees F (27 degrees C); defroster operates in continuous duty mode. The EH3508 is ideal for small cameras and fixed mount applications.
Maximum Lens and Camera Combination including BNC connector, H x W x L inches:EH3508: 3.00 x 2.87 x 6.80/ EH3508-1/EH3508-2: 3.00 x 2.87 x 5.00
Product Features
* Low Cost
* Small, Contemporary Design
* Forward Opening Hinged Lid
* Rear Link-lock Latch
* Die Cast and Extruded Aluminum Construction
* Designed for Indoor/Outdoor Fixed Mount Applications; Not for use with Pan/Tilt
* Easy Access for Servicing and Installation
* Cable Entry Glands and Mounting Holes on Bottom of Enclosure
* Factory Installed Low Power Heater-Defroster Models Available.
Spec Sheet in PDF format
|
 | Pelco EM1009U Enclosure Mount The Pelco EM1009U is capable of supporting loads up to 40 pounds (18 kg) and designed for ceiling/pedestal applications.

|  |  | Pelco EM1450 Housing Mount The Pelco EM1450 is a light duty wall mount designed specifically for use with Pelco's EH3500 Series enclosures.

|  |
|