 |  | 
  
The Pelco EH2500 Series are dust-tight and waterproof to protect CCTV cameras from adverse environmental conditions.
Constructed from aluminum, the enclosures are compact and lightweight. They can be installed on fixed mounts or pan/tilt units.
The EH2500 Series enclosures can accommodate a variety of cameras with fixed focal length or motorized zoom lenses. The enclosures have an outside diameter of 4.25 inches (10.80 cm) and are available in three lengths: 8 inches (20.32 cm), 12 inches (30.48 cm), and 15 inches (38.10 cm).
Each model features a sled for camera mounting and a "T" handle on the rear plate to assist in removing the plate during installation and servicing.
Optional accessories include a heater and sun shroud. The heater has two elements so that it can operate as a defogger and defroster. When the temperature drops below 70 degrees F (21 degrees C), one element turns on for defogging. When the temperature falls below 40 dgrees F (4 dgrees C), the second element turns on for defrosting.
Two glands on the rear of the enclosure provide access for camera and heater wiring.
Maximum Lens and Camera Combination including BNC connector, H x W x L inches: EH2508: 2.75 x 2.75 x 6.25/ EH2508-1/EH2508-2: 2.75 x 2.75 x 5.25
Product Features
* Dust-Tight, Waterproof
* Compact, Lightweight
* Aluminum Construction
* Meets NEMA 4 and IP66 Standards
* Accepts Cameras with Fixed Focal Length or Motorized Zoom Lenses
* Optional Environmental Accessories Include Sun Shroud and Dual-Element Heater
Spec Sheet in PDF format
|
 | Pelco EM1009U Enclosure Mount The Pelco EM1009U is capable of supporting loads up to 40 pounds (18 kg) and designed for ceiling/pedestal applications.

|  |  | Pelco EM1450 Housing Mount The Pelco EM1450 is a light duty wall mount designed specifically for use with Pelco's EH3500 Series enclosures.

|  |
|